ClearTouch 7 Day Programmable Thermostat
TruHeat's ClearTouch ETGM4 programmable thermostat combines user-friendly touch sensitive buttons with a sleek modern design, offering unparalleled user comfort control. ClearTouch ETGM4 is an energy-saving fully programmable solution for providing highly accurate temperature control for electric in-floor heating. It’s highly accurate sensing technology saves up to 28% on heating costs. Program a full 7 day schedule with ease for total room control.
FLEXHEAT SYSTEM
LOW VOLTAGE FLOOR HEATING SYSTEM
TruHeat's FlexHEAT system is a unique low voltage in-floor heating system designed to offer exceptional energy savings featuring our patented aluminum alloy heating tape. The tape is a miniscule 0.5 mm in thickness and comes in a variety of widths ranging from 5-12 cm (depending on the kit) size. Low voltage current is passed through the heating tape allowing it to gently warms the floor, resulting in the perfect spread of heat, creating a comfortable environment for all.
The FlexHEAT system covers 50-70% of the floor surface and therefore can operate at lower temperatures to provide the same heat output as other electric floor heating systems. This results in an efficient uniform heat output but with minimal energy consumption. FlexHEAT system is ideal for any irregular shaped rooms because the heat tape is flexible enough to be installed in any direction and is perfect for heating various areas with a single kit. There are 7 different kit sizes to choose from with each kit covering various square footages.
EVEN HEAT
DISTRIBUTION
LOW ENERGY CONSUMPTION
INSTALLS IN ANY DIRECTION
HEATS MULTIPLE ZONES WITH SINGLE UNIT
LEARN WHY OUR TECHNOLOGY CAN SAVE YOU ON ENERGY CONSUMPTION
KEY BENEFITS
SAFETY OF LOW VOLTAGE
EVEN HEAT DISTRIBUTION
SUITABLE AS PRIMARY HEAT SOURCE
LOW 0.5 MM PROFILE
FLEXIBLE DESIGN
EACH KIT CAN COVER MULTIPLE ZONES
CAN BE INSTALLED WITH OR WITHOUT CONCRETE LAYER*
EASY INSTALLATION
The FlexHEAT system is a great way to heat large areas all with the safety of low voltage. Installation is super easy as well due the flexible nature of our aluminum alloy heat tape. While conventional heating cables need to be buried inside a layer, the FlexHEAT system can be installed with or without the the concrete layer. Simply plan out your desired area of heating, choose the appropriate kit size, layout the heat tape, make the electrical connections and install your flooring of choice.
PLAN YOUR LAYOUT
LAY OUT FLEXHEAT TAPE
MAKE ELECTRICAL CONNECTIONS
INSTALL FINISHED FLOOR
UNDER FLOATING FLOORS (DRY INSTALLATION)
-
SUBFLOOR (CONCRETE OR WOOD)
-
RIGID FOAM INSULATION*
-
PLYWOOD/OSB LAYER
-
INSULATING UNDERLAYMENT*
-
FLEXHEAT SYSTEM
-
WOOD FLOORS
* Minimum plank thickness for LVT/LVP floors for dry installation has to be 6 mm or higher.
* Thermal insulation is recommended and is not a must. This prevents heat loss and maximises system efficiency.
* For high traffic areas we recommend placing a foam padding layer on top of the heat tape.
UNDER CERAMIC/STONE TILES
-
SUBFLOOR (CONCRETE OR WOOD)
-
RIGID FOAM INSULATION*
-
PLYWOOD/OSB LAYER
-
CEMENT BOARD/CONCRETE SKIM COAT/WEDI BOARD/PROVA BOARD
-
FLEXHEAT SYSTEM
-
FIBERGLASS MESH*
-
TILES WITH THINSET
* Thermal insulation is recommended and is not a must. This prevents heat loss and maximises system efficiency.
* The heat tape is additionally protected by a layer of fiberglass mesh and to add structural strength to the thinset layer.
UNDER NAIL/GLUE DOWN WOOD FLOORS AND 4MM VINYL PLANK
* Thermal insulation is recommended and is not a must. This prevents heat loss and maximises system efficiency.
-
SUBFLOOR (CONCRETE OR WOOD)
-
RIGID FOAM INSULATION*
-
PLYWOOD/OSB LAYER
-
CEMENT BOARD/CONCRETE SKIM COAT/WEDI BOARD/PROVA BOARD
-
FLEXHEAT SYSTEM
-
FIBERGLASS MESH*
-
SELF-LEVELLING CEMENT
-
FINISHED FLOOR
* The heat tape is additionally protected by a layer of fibre mesh and a cement layer to provide an even surface for the flooring to be laid on top.